EAN: 73-30130-01141-0
Kvaser Air Bridge Light HS M12
Configuration-free wireless CAN bridge, with M12 connector, certified for EU and US.
$1,090.00 USD
The Kvaser Air Bridge Light HS M12 is a configuration-free wireless CAN bridge that uses a dust and water-tight M12 connector to connect CAN networks. It provides a uniquely low and predictable latency compared to other wireless technologies and a highly robust signal even at long range.
Comprising a preconfigured pair of plug-and-play units, with integrated antennas and rugged housings, the Kvaser Air Bridge Light HS M12 ensures the rapid exchange of CAN data in environments or situations that make wired connection unsuitable or challenging, e.g. systems involving moving or rotating machines that are connected by CAN.
Employing a proprietary 2.4GHz wireless protocol based on frequency hopping and diversity, the Kvaser Air Bridge Light HS achieves predictable latency, without sacrificing stability or range. This makes the Air Bridge effective in infrastructures and control applications, where accurate message delivery times are essential, and a viable alternative for optical cable in some situations.
-
Downloads
Documentation
Download Datasheet
US Letter
Version 2.2.240918
Kvaser Air Bridge Installation Guide
Kvaser Air Bridge Installation Guide
Version 5.0.240918
Kvaser Air Bridge Light HS User’s Guide
Kvaser Air Bridge Light HS/HS (FCC) User's Guide
Version 3.0.240918
Kvaser Air Bridge System Integration Guide
Kvaser Air Bridge System Integration Guide
-
Description
Major Features
- A preconfigured pair of units that create a point-to-point radio link between two CAN networks.
- 2.4 GHz proprietary protocol.
- Internal antenna design, antenna output power max 18 dBm.
- Automatic baud rate detection (125K, 250K, 500K, 1M).
- Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
- High-Speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s.
- Power supplied through the CAN bus interface.
- Rugged aluminum housing.
- Dust and water-resistant M12 connector on each unit.
- Plug and play, driver-free, and configuration-free.
- Fully compatible with J1939, CANopen, NMEA 2000 and DeviceNet.
- Extended operating temperature range from -40 to +70 °C.
Â
Note: Error Frames and Arbitration information are not transmitted by the Air Bridge units across the wireless link.
Warranty
2-Year Warranty. See our General Conditions and Policies for details. Register your product at www.kvaser.com/getting-started for an additional 1-year Warranty Extension.
Support
Free Technical Support on all products available by contacting support@kvaser.com.
Certifications
The Kvaser Air Bridge Light HS (FCC) (EAN: 73-30130-01008-6) has been tested and found to comply with part 15 of FCC Rules. See User Guide for full FCC Compliance Information Statement.
The Kvaser Air Bridge Light HS (EAN: 73-30130-00808-3) has been tested and declared to be in conformity with the relevant Union harmonisation legislation Radio Equipment Directive (RED) 2014/53/EU (Art. 3.1a, 3.1b, and 3.2) and RoHS recast Directive 2011/65/EU (Art. 4.1). See User Guide for full EU Declaration of Conformity.
-
Tech Specs
CABLES, Interfaces, Hardware, CAN, Accessories
-
Media
-
Where to Buy
-
View Software
WE HAVE OVER 83 UNIQUE SOFTWARE OPTIONS TO PAIR WITH KVASER HARDWARE
As well as having a premium global reseller network, Kvaser provides all it’s customers with access to a large number of tailored software that works perfectly with Kvasrer hardware.
Bus Analysis
28 Software Partners in this category
Calibration
10 Software Partners in this category
CANopen
17 Software Partners in this category
Data Acquisition
14 Software Partners in this category
Diagnostics
20 Software Partners in this category
ECU Development
14 Software Partners in this category
Flash Programming
5 Software Partners in this category
Protocol Stack
14 Software Partners in this category
System Development
22 Software Partners in this category
Kvaser-Compatible Software Provided by 83 Software Partners
)
)
){kind=icon}