MilCAN

MilCAN is a higher layer protocol that is applied on top of a a standard CAN network (as specified by ISO 11898) for use in military vehicles.

The MilCAN specification was defined by the International High Speed Data Bus Users Group (IHSDB-UG), formed in 1999. The stated goal of the spec is “To develop, for various application classes in all military vehicles, a common interface implementation specification based on CANbus”.

There are two versions of MilCAN – MilCAN A and MilCAN B.

MilCAN A

MilCAN A uses 29 bit identifiers and uses a similar frame format to J1939. MilCAN A defines 1Mbit, 500Kbps, and 250Kbit communication rates. In addition, MilCAN A is:

  • Time-triggered, synchronous application protocol over 29bit CAN
  • Mission-critical in mind, message transmission is prioritized
  • Utilizing a flying master scheme
  • Finalized under: MilCAN A specification MWG-MILA-001, Revision 3
  • Widely used in armored vehicles

MilCAN B

MilCAN B uses 11 bit identifiers, an actual extension of the CANopen application layer, and only allows periodic data to be transmitted via the bus. MilCAN B supports data rates from 10kbps to 1 Mbps.

More information can be found at www.milcan.org.
Specifications can be downloaded at http://www.milcan.org/Downloads/downloads.html

Go Back To Higher Layer Protocols

More Resources

Related Stories:

CAN Is a Smart Choice for Military Applications
15/08/2018

CAN Is a Smart Choice for Military Applications

A recent article in CAN Newsletter Online discussed the widespread use of the CAN protocol in military and defense applications.… Read More

Read More
CAN interfaces for video displays in tanks and light armoured vehicles

CAN interfaces for video displays in tanks and light armoured vehicles

Engineers at Nijkerk Computer Systems needed CAN interfaces for video display terminals that would be integrated into ground-based tanks and light arm Read More

Read More

Get the MilCAN Stack:

Contact an Expert: