example/c/kvdiag/normal.c

#include "stdio.h"
#include "signal.h"
#include "canlib.h"
#include "kvDiag.h"

static void check(const char *name, canStatus status); /* Checks for errors */
static void intHandler(int unused); /* Handle Ctrl-C */
static void printSample(kvDiagSample *sample); /* Print sampled frame */
static void usage(); /* Print usage */

static int interrupt = 0;

static const char *CONF_500KBIT = "{"
                                    "\"tseg1\" : 59,"
                                    "\"tseg2\" : 20,"
                                    "\"sjw\" : 16,"
                                    "\"brp\" : 2"
                                  "}";

int main(int argc, char *argv[])
{
  int channel = -1;

  /* Parse command-line parameters. */
  for (int i=1; i<argc; i++) {
    if (sscanf(argv[i], "-ch=%d", &channel) == 1);
    else {
      usage();
      exit(1);
    }
  }

  if (channel == -1) {
    usage();
    exit(1);
  }

  canInitializeLibrary();

  canHandle hnd;
  /* We open the channel with the EXCLUSIVE flag to not let any other
   * application interfere with the CANtegrity channel */
  hnd = canOpenChannel(channel, canOPEN_EXCLUSIVE);

  canStatus stat;
  /* Attach an analyzer to an open CAN channel. */
  stat = kvDiagAttachAnalyzer(hnd, DIAG_ANALYZER_TYPE_DEFAULT);
  check("kvDiagAttachAnalyzer", stat);

  /* We want to run DIAG_PROGRAM_TYPE_NORMAL. It needs a JSON configuration
   * specifying bus parameters. */
  stat = kvDiagSetProgram(hnd, DIAG_PROGRAM_TYPE_NORMAL, CONF_500KBIT);
  check("kvDiagSetProgram", stat);

  /* Start the analyzer. */
  stat = kvDiagStart(hnd);
  check("kvDiagStart", stat);

  /* Continuously read samples and print until Ctrl-C is pressed. */
  signal(SIGINT, intHandler);

  kvDiagSample sample;

  while (1) {
    /* Wait at most 100 ms for a new sample. */
    stat = kvDiagReadSampleWait(hnd, &sample, 100);
    if (stat == canOK) {
      printSample(&sample);
    }

    /* Check Ctrl-C. */
    if (interrupt) {
      break;
    }
  }

  /* Stop the analyzer. */
  stat = kvDiagStop(hnd);
  check("kvDiagStop", stat);

  /* Detach the analyzer, since we're not going to restart it. */
  stat = kvDiagDetachAnalyzer(hnd);
  check("kvDiagDetachAnalyzer", stat);

  /* Close the CAN channel. */
  stat = canClose(hnd);
  check("canClose", stat);
  return 0;
}

static void check(const char *name, canStatus status)
{
  if (status != canOK) {
    printf("%s returned %d\n", name, status);
    exit(1);
  }
}

static void intHandler(int unused)
{
  interrupt = 1;
}

static void printEdges(kvDiagSample *sample)
{
  uint64_t time = sample->sample.startTime;
  int value = sample->sample.startValue;
  int i = 0;
  printf("Start \t  End \t Length (microseconds) \t Value\n");
  printf("-----------------------------------------------\n");
  do {
    printf("%6llu \t %6llu \t %2.2f \t\t  %u\n",
           time,
           time + sample->sample.edgeTimes[i],
           (1.0 * sample->sample.edgeTimes[i]) / (1.0 * sample->sample.sampleFreq),
           value);
    time += sample->sample.edgeTimes[i];
    value = !value;
    i++;
  } while (i < sample->sample.edgeCount);
  printf("-----------------------------------------------\n\n");
}

static void printSample(kvDiagSample *sample)
{
  printf("CAN ID: 0x%x SEQ: %u. DLC: %u, flags: 0x%x, data:",
         sample->msg.id,
         sample->header.seqno,
         sample->msg.dlc,
         sample->msg.flag);

  if (sample->msg.dlc > 0) {
    for (int i=0; i < sample->msg.dlc; i++) {
      printf(" %02X", (unsigned char)sample->msg.data[i]);
    }
  }
  printf("\n\n");
  printEdges(sample);
}

static void usage()
{
  printf(
    "Usage: 'normal_example -ch=n', "
    "where 'n' is a CANlib channel with analyzer capability.\n\n"
    "Note: This program requires a working CAN bus with traffic to function properly.\n");
}